The diagram explains the way in which bricks are made for the building industry.
Overall, there are seven stages in the process, beginning with the digging up of clay and
culminating in delivery.
To begin, the clay used to make the bricks is dug up from the ground by a large
digger. This clay is then placed onto a metal grid, which is used to break up the clay into
smaller pieces. A roller assists in this process.
Following this, sand and water are added to the clay, and this mixture is turned into
bricks by either placing it into a mould or using a wire cutter. Next, these bricks are placed in
an oven to dry for 24 – 48 hours.
In the subsequent stage, the bricks go through a heating and cooling process. They are
heated in a kiln at a moderate and then a high temperature (ranging from 200c to 1300c),
followed by a cooling process in a chamber for 2 – 3 days. Finally, the bricks are packed and
delivered to their destinations.
- Many students choose to take a gap year before starting university to travel or gain work experience Do you think this is a good idea or a waste of time 73
- The table below shows the results of surveys in 2005 2010 and 2015 about McGill University Summarise the information by selecting and reporting the main features and make comparisons where relevant 84
- The table below gives information about the underground railway systems in six cities 78
- The diagram illustrates the process that is used to manufacture bricks for the building industry Summarize the information by selecting and reporting the main features and make comparisons where relevant
- The first car appeared on British roads in 1888 By the year 2000 there may be as many as 29 million vehicles on British roads Alternative forms of transport should be encouraged and international laws introduced to control car ownership and use To what ex